Auto Body Repair Tool

  • 40″ Car Creeper Car Automotive Repaired Creeper Mechanics Creeper

    40″ Car Creeper Car Automotive Repaired Creeper Mechanics Creeper

    Item No.:FR4003

    Product Size:1030x420x120mm

    Weight capacity: 150KGS

     

     

     

  • 40″ Car Creeper Mechanic Creeper

    40″ Car Creeper Mechanic Creeper

    Item No.:TAC6405

    Product Size:1025*425*105mm

    Material:Steel and Spone,Sponge cushioned black leather cover.

     

     

  • Engine Timing Tool Kit VAG 1,8/2,0 TFSI (EA888)

    Engine Timing Tool Kit VAG 1,8/2,0 TFSI (EA888)

    Item No.:BT-PUPUVWTFSI

    Used for correct the camshaft and crankshaft timing position
    Four cyliner EA888 petrols engine:1.8 R4 14V TSI/TFSI
    Applications:2006-2013 VAG series TSI/TFSI EA888 engines (1.8L 2.0L)

  • Engine Timing Tool Kit For BMW N51/N52//N53/N54/N55

    Engine Timing Tool Kit For BMW N51/N52//N53/N54/N55

    Item No.:BT-PUPUBMW

    Application:
    E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi
    E61/E63:523i,525i,525xi,530i,530xi,535xi,630i
    E64/E65:630i,730i
    E66/E70:730Li,X5 3.0 Si
    E81/E82:130i,135is
    E93:325i,328i,330i,335i
    E83:X3 2.5i,2.5Si,3.0i,3.0Si
    E85/E86:Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si
    E87/E90:130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi
    E91:323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi
    E92:323i,325i,325xi,328i,328xi,330i,330xi,335i

  • 6pc Engine Timing Tool

    6pc Engine Timing Tool

    Item No.:BT-PUPUVWNA

    To test and adjust the engine timing
    For 1.0L 3 cyliner gasoline engines VW UP,SEAT Mii frome Bj,2011 SKODA Citigo.

  • 5pcs Engine Timing Tool For FORD SIGMA

    5pcs Engine Timing Tool For FORD SIGMA

    Item No.:BT-PUPUX5FORE

    This new camshaft setting bar is suitable for all the applications including the latest HWDA/HWDB/HXDA engines.
    Also included in the kit is 303-748(21-259) for Focus/C-Max 1.6,1.4/1.6 and Fiesta/Fusion 1.24/1.4/1.6.

  • 9pcs Common Rail Diesel Injector Puller Extractor Set

    9pcs Common Rail Diesel Injector Puller Extractor Set

    Item No.:BT-EXINDIX9

    For removing stuck and the seized common-rail injectors without dismount the cylinder head.
    The sturdy construction will enable the swift removal of even the most severly seized in injector.
    Speifcation:
    Total Length: 350mm
    Contents: Slide Hammer (1.75kgs)
    Adapter M17 x 1.0
    Adapter M27 x 1.0 for Bosch injector nozzle.
    Adapter: Puller w/M12 x 1.75

  • 17pcs Clutch Alignment Tool Set

    17pcs Clutch Alignment Tool Set

    Item No.:BT-CEEMX17

    For fast accurate alignment of flywheel pilot hole and clutch drive plate when assembling to car
    Precision manufactured steel bushes with chemically blacked finish
    Suitable for use on most cars and light commercial vehicles

    Applications: Audi, Citroen,Fiat,Ford,Honda, Mazda,Mitsubishi,Nissan,Opel, Peugeot, Renault, Rover,Saab,Toyota,Vauxhall, VW,Volvo.

  • Electronic Fuel Injection Signal Noid Light Tester Set

    Electronic Fuel Injection Signal Noid Light Tester Set

    Item No.:BT-LAINX12C

    Locate And Isolate ECU Signal Faults Fast. Noid And Idle Air Control Valve Indicator Lights Test For Control Signal From ECU.
    Simply Disconnect Harness And Plug In Appropriate Light To See If The Component Is Being Fed A Trigger Signal.
    Set Includes 1.2 Meters Fibre Optic Cable To Allow Light To Be Viewed From The Drivers Seat.
    Simple To Use And Has A Wide Vehicle Application.
    Noid Light Compatibility: GM TBI; GM SCPI; GM FPI; GM MULTEC 2; Bosch 2; Bosch PFI; Ford TBI; Geo TBI
    IAC Light Compatibility: GM 700 TBI/FPI With Flat Or Square 4-pin Connectors

  • 30PCS Alternator Pullery Tool Kit

    30PCS Alternator Pullery Tool Kit

    Item No.:BT-PUX30ALTE

    This product is a disassembly tool for generator pulley. It is suitable for disassembly and assembly of generator pulley of
    Volkswagen, Audi, BMW, Ford, Skoda, Benz, Opel, Volvo, Porsche, Renault and other models. It has complete specifications and is easy to use.

  • 5Pcs Tie Rod/Ball Joint Pitman Arm Tool Kit

    5Pcs Tie Rod/Ball Joint Pitman Arm Tool Kit

    Item No.:BT-SEROX5C

    Use to separate ball joints,tie rods,
    and Pitman arms.
    Features: overall heat treatment, high hardness, high torque, fine workmanship, wear-resistant and durable, simple installation and convenient use
    Set Includes:
    1pc 11/16″tie rod spreader.
    1pc 15/16″ ball joint spreader.
    1pc 1-1/8″ pitman arm wedge
    1pc striking handle.
    1pc air hammer adapter

  • Petrol Engine Compresssion Tester Set

    Petrol Engine Compresssion Tester Set

    Item No.:BT-CONASET

    Kit includes a straight and an angled push-on connector. 0-20 Bar/0-300 Psi
    Adaptor: M10 x1.0,M12 x 1.25,M14x 1.25,M18x 1.5
    Hose length: 45cm

1234 Next > >> Page 1 / 4