Big discounting Dent Slide Hammer Kit - Master Generation 2 Wheel Bearing Kit – Just Better

* The Generation 2 type of wheel bearing, which are largely fitted to Ford, Land Rover, Mazda, VW and Volvos demand dedicated tools when the need to install new generation 2 wheel bearings is required. If Generation 2 wheel bearings are pressed into place as a conventional bearing, the force applied causes stress to the bearing and rapid deterioration. To help avoid potential high failure rates we’ve developed a specialist Generation 2 installation kit.
* The Gen 2 kit is designed to correctly distribute the pressing forces through the outer bearing alleviating the potential for bearing failure whilst also allowing for the suspension leg to remain in-situ when fitting the new bearings. Included in the kit is a selection of specialist tools enabling a wide range of GEN2 bearings to be replaced.
* This Generation 2 Master Bearing Kit makes light work of removing or installing Gen 2 bearing, proving indispensable for vehicle workshops.
* Designed to correctly distribute the pressing force through the outer bearing alleviating the potential for bearing failure whilst also allowing for the suspension leg to remain in-situ when fitting the new bearing.

62 / 66 / 72 / 78 / 82 / 85mm
62mm-Audi A2 VW Lupo(Front)
66mm-Skoda Fabia,VW Fox(Front),Polo
72mm-Audi A1 and A2,Seat Cordoba,Ibiza,Skoda Fabia,Roomster,Polo(Front),VW Fox with PAS (Front)
78mm-Ford Focus II,C-Max,Volvo C30,C70,S40,V50(Front),Mazda 3
82mm-Ford Mondeo,Galaxy,S-Max,Land Rover Freelander 2,Volvo S80,V70,XC60,XC700
85mm-VW Multivan,Touareg,Transporter(Front & Rear)

Master Generation 2 Wheel Bearing Kit is sized to fit most standard wheel bearings.
The tapered sides of the disc tools install races and the flat sides installs the seals.
The collars fit standard race sizes used in most wheel bearing applications.