Products
-
Cranks Crankshaft Pulley Removal Wrench Holder Tool For Honda And Acura Engines
Item No.:BT7011
*Designed with a 4″ Offset for holding the damper when removing and installing the crank bolt on many honda and acura engines.
*Designed with a 50mm outer hex and large center opening to fit impact sockets.
*Use 1/2″ Dr.ratchet of breaker bar to hold the damper in place.
-
Crankshaft Seal Flange Remover and Installer Tool
Item No.:BT7018
*Design for mouting of the transmission-side radial sealing ring
*Installing the sealing ring without this tool can cause leaks,destruction of the new sealing ring and bad engine running
*Suitable for VAG models with 1.4 & 1.6L 16V engines,built in e.g.following vehicles:Seat *Arosa,Ibiza,Cordoba,Leon,Toledo,Inca Skoda Facia,Octabia,Roomster VW Lupo,Polo,Golf,Bora,Beetle,Caddy
-
Crankshaft Pulley Wrench Holder Holding Removal Tool For Subaru
Item No.:BT7026
*Designed to hold the crankshaft pulley stationary while loosening or tightening the center (crankshaft) bolt
*Application Detail:
1993-present Impreza
1998-2009 Forester
1994-2009 Legacy and Outback
2005-2006 Saab 9-2X
2004-2006 Baja
2012-present BRZ and Scion FR-S
-
Engine Setting/Locking Kit-Vauxhall/Opel
Item No.:BT8073
*Covers a wide range fo Vauxhall/Opel and Chevrolet petrol engines
*Includeds the necessary tools for setting and locking the camshafts and crankshaft
*Also includes the pins for locking the timing chain tensioner
*Applications:Vauxhall/Opel,Chevrolet,Holden,Cadillac
-
BMW B38/B46/B48 Engine Timing Tool Set
Item No.:BT8303
*Designed for locking crankshaft and camshafts in timing position while servicing BMW B38/B48 engine
*Application:BMW B38,B48 engine.
-
BMW M52TU, M54, M56 Master Camshaft Alignment Timing Tool with Double Vanos Straight 6
Item No.:BT8512A
*Contains a comprehensive set of tools to perform camshaft + VANOS timing on M52TU,M54,M56 Engines
*Also applicable for camshaft timing on non-VANOS engines(M42,M44,M50,M52,MS50US and S52US)
*Kit includes the following:
BMW Double VANOS Camshaft Alignment Tool
BMW VANOS Sprocket Wrench M50 M52 S50 S52
BMW 4 & 6 Cylinder Camshaft Alignment/Timing Tools
-
Spark Plug Boot Puller Tongs
Item No.:BT1007
*Fully insulated tongs designed for removal/installation of spark plug boot.
*Reduces risk of electric shock or burns when checking installation of plug leads whilst running engine.
-
8pcs Engine Oil Filler Set (Plastic)
Item No.:BT1685
*Allows for fast oil fitting without spilage
*2 liter funnel fits adator for wide application range
*Color-code plastic adapters for oil filler hole
*Special angle extension with swivel feature for hard to reach place
*Suitable for use on Audi,BMW,Dodge,Honda,Mazda,Mercedes,Nissan,Subaru,Toyota,Volvo and VW. -
8pcs Engine Oil Filler Set (Aluminum)
Item No.:BT1691
*Allows for fast oil fitting without spilage
*2 liter funnel fits adator for wide application range
*Color-code plastic adapters for oil filler hole
*Special angle extension with swivel feature for hard to reach place
*Suitable for use on Audi,BMW,Dodge,Honda,Mazda,Mercedes,Nissan,Subaru,Toyota,Volvo and VW. -
11pcs Oxygen Sensor & Sending Unit Socket Set
Item No.:BT2584
*For removal and installation of oxygen sensors,oil pressure sending units an vacuum switches for use on most domestic and imported vehicle
*Includes:
(1)1/2″ Drive 29mm x 90mm Oxygen Sensor Socket
(1)3/8″ Drive 7/8″ x 90mm Oxygen Sensor Socket
(1)1/2″ Drive 27mm x 79mm Fuel Injector Socket
(1)3/8″ Drive 7/8″ x 80mm Vacuum Switch Socket
(1)3/8″ Drive 1-1/16″ x 74mm Oil Sending Unit Socket
(1)1/2″ Drive 7/8″ x 50mm Oxygen Sensor Socket
(1)3/8″ Drive 7/8″ x30mm Offset Oxygen Sensor Wrench
(1)1/2″ Drive 22mm Special Tube Socket
(1)2-1/8″ Offset Oxgen Sensor Wrench
(1)1/2″ Drive Deep Oxygen Sensor Socket(1)Oxygen Sensor Thread Chaser
-
Oil Filter Chain Wrench
Item No.:BT3024
*Ideal for removing difficult filters cramped engine compartments
*200mm double chain for an extra heavy duty hold on the oil filter
*Can be used with a 23mm spanner of a 1/2″ drive ratchet/bar etc.
*135mm Dia Max
-
30pcs Oil Filter Cap Wrench Set
Item No.:BT3026
*Cap type filter wrenches,made from 7 and 16 gauge steel,will withstand up to 115Nm (85lb.ft) of torque.
*Designed to grip like sockets,thereby minimising the possibility of crushed filters.
*Includes adjustable oil filter wrench
*Adaptor allows use with 3/8″ or 1/2″ Sq drive wrenches.