Professional Design Bridge Puller Kit - 18pcs Shock Absorber Remover/Installer Tool Kit – Just Better

* Made from chrome vanadium steel.
* Suitable for most common vehicle types.
* 1 x push-through reversible ratchet, output 12-point SW 21 mm.
* For repair work on shock absorbers and for holding the shock absorber piston.
* 7 x socket wrench inserts hexagon, deep, drive internal square 12.5 mm (1/2 inch) and external hexagon SW 21 mm, SW 16 – 17 – 18 – 19 – 21 – 22 – 24 mm, 1 x socket spanner insert hexagonal, deep, drive internal square 12.5 mm (1/2 mm). 2 inches), length: 12 cm. 2 mm, SW 7 mm, suitable for Mercedes Benz Vaneo | 1 x socket wrench insert hexagon, deep, drive internal square 12.5 mm (1/2 inch), length 122 mm, SW 8 mm, suitable for BMW | 1 x socket spanner insert hexagon, deep, drive internal square 12.5 mm (1/2 inch), length 122 mm, SW 9. mm, for Vauxhall Corsa B, Astra F/G, Vectra B.
* 3 x bit inserts, length 122 mm, drive internal square 12.5 mm (1/2 inch), output hexagon socket 6 – 7 – 8 mm, 3 x bit inserts, length 122 mm, drive internal square 12.5 mm (1/2 inch), output special profile (oval), SW 5 x 8 – 6 x 8 x 8 x 8 x 8 x 8 x 8 mm. – 7.1 x9.6 mm, suitable for Porsche Cayenne S, VW Touareg | 1 x bit insert, length 122 mm, drive internal square 12.5 mm (1/2 inch), T-profile (for torx) T50, suitable for Vauxhall Astra H

* Used for servicing import and domestic vehicles.
* Designed for removing and installing shocks and struts.
* Range for the professional work on shock absorbers,Strut Bearing,Coil Spring
* The go-through design of the socket and ratchet allows the extension to pass through the middle.
* Permits the removal of the top suspension nut by holding the strut piston, so it doesn’t rotate while turning the nut.

1xGo-Through Ratchet: 21mm;
7x Go-Through 82mm Deep Sockets: 16, 17, 18, 19, 21, 22, 24mm;
3x Female Hex: 7, 8, 9mm;
3x Male Hex: 6, 7, 8mm;
3x slotted double-d sockets: 5 x 8, 6 x 8, 7.1 x 9.6mm;
1x TRX-Star*: T50