Reliable Supplier Pdr Glue Remover - PDR Paintless Dent Repair Tools Slide Hammer – Just Better

1. Clean the dent with a clean wet cloth;

2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;

3. Use a proper drawing gasket. Large dent requires a large drawing gasket.

4. Pull the trigger and apply the drawing gasket with extruded glue;

5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres;

6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;

7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;

8. Clean the repaired place with a clean wet cloth.

1pc slide hammer