Hot Sale 10kv Led Surge Protector Ip67 Lightning Arrester Spd

LED lightning SPD 10KV Series

Model:SH-10KV-277

This product describes the performance index of LED street lamp power lightning arrester of Hunan shunhan Electronics Co., Ltd.SH-10KV-277 street lamp lightning arrester is based on GB18802.1 lightning protection standard design, small volume, high waterproof and dustproof grade, suitable for lightning protection of outdoor LED street lamps.

Product Features:

*Select high-quality lightning protection components and multiple certification;

*Fine protection of equipment, beautiful appearance;

*It is specially made for lightning protection of street lamps, with small volume;

*The protection grade is up to IP67, suitable for outdoor environment;

*The maximum discharge current can reach 10kA and the response time is fast

Send email to us

Product Detail

Product Tags

OVERALL DIMENSION

Project	H1	H2	J	G	R
Size(mm)	50±0.5	100±1	53±0.5	22±0.5	4.5±0.5

MEASURED WAVEFORM

RELIABILITY TEST

Serial Number	Test Items	Test Method / Severity Level	Judgment Criteria	Number Of Tests	Test Equipment/model	Test Result	Reference Standard
1	Free Fall	Put the sample in the packing box and drop it vertically and freely on the cement floor from a height of 1m. Drop it once in each direction, four sides for a total of four times. Each drop is used to check the function of the test object.	The appearance and function shall be normal	2	Packing Box	PASS	GB/T 2423.8
2	ESD Test	Test setting environmental conditions: temperature 20 ℃ ~ 30 ℃, relative humidity 35% ~ 55%: the test sample is tested for contact discharge and air discharge. The air discharge is ± 15kV for all non-metallic parts, and then discharge to the ground once every time for 10 consecutive times. The contact discharge is 8Kv for all metal parts for 10 consecutive times, and then discharge to the ground;	The appearance and function shall be normal	2	Electrostatic Discharge generator	PASS	GB/T 17626.2
3	Sinusoidal Vibration Test	Place the sample on the vibration test bench after packaging, and vibrate with a fixed frequency of 30Hz for 30min.	The appearance and function shall be normal	2	Microcomputer Vibration test bench	PASS	GB/T 2423.10
4	Steady Damp-heat	The test sample is not packaged and placed in a constant temperature and humidity box with a temperature of 38 ℃ - 42 ℃ and a humidity of 89% - 93%. The test is continued without power for 48h. After the test, it is placed at room temperature for 2h, and then tested after the test;	The appearance and function shall be normal	2	Humidity Chamber	PASS	GB/T 2423.3
5	Hot Test	The test sample is not packaged, and is placed at the temperature of 55 ° C ± 2 ° C for 2h. After the test, it is placed at room temperature for 2h, and then tested after the test;	The appearance and function shall be normal	2	Humidity Chamber	PASS	GB/T 2423.2
6	Low Temperature Test	The test sample is not packaged, and is placed at the temperature of - 25 ℃ ± 2 ℃ for 2h. After the test, it is placed at room temperature for 2h, and then tested after the test;	The appearance and function shall be normal	2	Humidity Chamber	PASS	GB/T 2423.1
7	Salt Spray Test	Test conditions: 5% NaCl brine, pH 6.5-7.3, the test sample is not packed and placed in the salt spray tester: the test shall be continued for 12h, and then placed at room temperature for 24h after the test, and then the test and detection shall be carried out;	The appearance and function shall be normal after the test	2	Automatic Intelligent salt spray testing machine	PASS	GB/T 2423.17