Auto Tools

  • Heavy Duty Hydraulic Gear Puller Kit

    Heavy Duty Hydraulic Gear Puller Kit

    Item No.:BT3359

    *For removing pulley,bearings,gears and other components.

    *Set includes:

    1xbearing separator,1xbeam,1xcentre adapter,1xtriple head,1xtwin head,3×4″leg puller,3×6″leg puller,3×8″leg puller,1xram part,1×2″ extension rod,1×10 tonne hydraulic ram and 3 x screw.

  • Adjustable Wheel Bearing Lock Nut Wrench

    Adjustable Wheel Bearing Lock Nut Wrench

    Item No.:BT9059

    *Adjustable jaw with locking feature suits for removing both hexagon & octagon wheel bearing lock nuts.

    *Inludes three sets of pins to lock nuts with pin holes

    1/2″ or 3/4″ sq drive

    *Capacity:

    6PT nuts:1-3/4″ to 5-3/4″ (49-135mm)

    8PT nuts:1-3/4″ to 5-5/8″ (49-143mm)

    Pin dia:1/4″,5/16″,3/8″(6,8,10mm)

  • 5pcs Brake Piston Wind Back Tool Set

    5pcs Brake Piston Wind Back Tool Set

    Item No.:BT9010A

    1. Preset the brake piston when changing the brake pad

    2. With universal adapter,to be operated with T-handle or 19mm wrench

    3. Application: Audi, VW, Skoda, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Saab, Rover, Subaru, Toyota, Volvo

    4. Made of premium steel material, with high strength and good hardness.

  • Master Generation 2 Wheel Bearing Kit

    Master Generation 2 Wheel Bearing Kit

    Item No.:BT9057

    *Designed to correctly distribute the pressing force through the outer bearing alleviating the potential for bearing failure whilst also allowing for the suspension leg to remain in-situ when fitting the new bearing.

    *Sizes and Vehicles

    62mm-Audi A2 VW Lupo(Front)

    66mm-Skoda Fabia,VW Fox(Front),Polo

    72mm-Audi A1 and A2,Seat Cordoba,Ibiza,Skoda Fabia,Roomster,Polo(Front),VW Fox with PAS (Front)

    78mm-Ford Focus II,C-Max,Volvo C30,C70,S40,V50(Front),Mazda 3

    82mm-Ford Mondeo,Galaxy,S-Max,Land Rover Freelander 2,Volvo S80,V70,XC60,XC700

    85mm-VW Multivan,Touareg,Transporter(Front & Rear)

  • 7pcs Adjustable Brake Caliper Rewind Tool Kit

    7pcs Adjustable Brake Caliper Rewind Tool Kit

    Item No.:BT9000

    *For the top pressure operation of various models of brake pistons, to press back the brake piston and replace the brake pads;

    *Repair and installation of the automotive brake cylinder,the pump, and the replacement of the brake pads are the complete adjustment tools for the brake cylinders on the market. It is easy to operate and simple. It is an essential tool for auto repair in the garage.

  • Auto Repair Tool Wheel Bearing Removal Kit (BA3)

    Auto Repair Tool Wheel Bearing Removal Kit (BA3)

    Item No.:BT9056

    *Intended to replace front and rear wheel bearing for BA3 of 8th and 10th of Lada Samara,Kalina,Priora,Granta,Largus,as well as the REnault logan.

    *Allows to replace wheel bearing without dismantling suspension towers

    *Adapter size:

    29mm,36mm,51mm,55mm,59mm,64mm,68mm,72mm

  • 13PCS ATF Transmission Fluid Oil Filling Refilling Adapter Kit Set

    13PCS ATF Transmission Fluid Oil Filling Refilling Adapter Kit Set

    Item No.:BT7013

    1. To be used with Tool BT3688 and BT3699 ATF Filling System but is compatible with other brands of filling tanks.

    2. Includes 13 adaptor suitable for FORD,VW/AUD,Mercedes,Skoda,BMW,Honda,Nissan,…

  • Front Wheel Bearing Puller-Ford Transit

    Front Wheel Bearing Puller-Ford Transit

    Item No.:BT1687

    *For safe removal of drive flange with wheel bearing from the hub assembly in situ and wheel bearing from drive flange

    *Essential tool when replacing brake discs allowing the drive flange to be split from the hub assembly

    *Features a cleverly designed impact force screw.

  • 8pcs Drum Brake Tool Set

    8pcs Drum Brake Tool Set

    Item No.:BT4019

    * Brakes Servicing Remove Install Brake Springs Tools Kit

    * Brake spring installer removal tool

    * This high-quality drum brake service tool set is a must have in the garage or workshop for professionals and enthusiasts alike

    * Made of high-quality materials, this heat-treated, chrome-plated brake tool set is very durable.

  • Rear Trailing Arm Bush Removal Installation Tool for Honda CRV

    Rear Trailing Arm Bush Removal Installation Tool for Honda CRV

    Item No.:BT1686

    *Used for removal and installation of the rear trailing arm bush without damaging the ABS sensor cable

    *A cut away window allows visual access for installing correctly.Adequate and appropriate *lubricants to be used on threaded force screws and trust bearing

    *Application(s):Honda CRV K6 & K8 (96-02)

  • 16pcs Air Brake Piston Wind Back Tool Set

    16pcs Air Brake Piston Wind Back Tool Set

    Item No.:BT4016

    If you have a hard time resetting parking brake caliper pistons and feel that it is time to make things easier, save yourself time and aggravation with the DNT Caliper Piston Tool Kit.

  • 30pcs Hex Key Socket Bit Set 12 Dr

    30pcs Hex Key Socket Bit Set 12 Dr

    Item No.:BT3277

    *Forged CR-V steel socket with CrV steel spline bits.

    *Sockets heat treated & chrome plated for resistance to corrosion.

    *Contens:

    Length 55mm:5-6-7-8-10-12-14-17-19mm

    Length 100mm:5-6-7-8-10-11-12-13mm

    Length 140mm:5-6-7-8-10-12-14mm

    Length 200mm:5-6-7-8-10-12mm